Products
LED Chip Current Position: Home > Products > LED Chip
  • SK6813 LED


    1.Product Overview :
    SK6813 is a smart LED control circuit and light emitting circuit in one controlled LED source, which has the shape of a 5050 LED chip. Each lighting element is a pixel, and the intensities of the pixels are contained within the intelligent digital interface input. The output is driven by patented PWM technology, which effectively guarantees high consistency of the color of the pixels. The control circuit consists of a signal shaping amplification circuit, a built-in constant current circuit, and a high precision RC oscillator.
    The data is transmitted using the dual signal input-signal output transmission method. The built-in signal regeneration circuit makes the cascaded signal drive capability enhanced. The data output by the controller is transmitted to the DIN of the first lamp bead and the second lamp bead respectively. BIN, the DOUT data of the first lamp beads are transmitted to the DIN of the second lamp beads and the BIN of the third lamp beads, respectively;
    The LED has a low driving voltage (which allows for environmental protection and energy saving), high brightness, scattering angle, good consistency, low power, and long life. The control circuit is integrated in the LED above.


    2.Main Application Field:
    ●Full color LED string light, LED full color module, LED super hard and soft lights, LED guardrail tube, LED appearance / scene lighting
    ●LED point light, LED pixel screen, LED shaped screen, a variety of electronic products, electrical equipment etc..


    3.Description:
    ●Top SMD internal integrated high quality external control line serial cascade constant current IC;
    ●control circuit and the RGB chip in SMD 5050 components, to form a complete control of pixel, color mixing uniformity and consistency;
    ●built-in data shaping circuit, a pixel signal is received after wave shaping and output waveform distortion will not guarantee a line;
    ●The built-in power on reset and reset circuit, the power does not work;
    ●gray level adjusting circuit (256 level gray scale adjustable);
    ●red drive special treatment, color balance;
    ●line data transmission;
    ●plastic forward strengthening technology, the transmission distance between two points over 10M;
    ●Using a typical data transmission frequency of 800 Kbps, when the refresh rate of 30 frames per sec





    SK6813 LED Datasheet



Home | Products | Support | News | About Normand | Contact us
                       SHENZHEN NORMAND ELECTRONIC CO.,LTD
展开客服