中文 | English
 
Products
3535 Series Current Position: Home > Products > 3535 Series
  • SK9826 MINI LED


    1. Product Overview :
    SK9826MINI is a two-wire transmission three-channel (RGB) drive control circuit and light-emitting
    circuit in one of the intelligent external control LED light source. Built-in constant current circuit and
    RC oscillator; internal integrated current gain control module, CMOS process, low voltage, low power
    consumption; when REXT is floating, the three-channel constant current driver default output of 18mA,
    the product is equipped with signal decoding module, Can also be REXT external resistor to adjust the
    required current, each output channel can output 16 (65536 level) gray adjustable linear current; using
    two-wire output, DATA data and synchronous CLK signal, so that the series chip The output action
    synchronization; refresh rate up to 4KHz, showing more delicate and smooth, the default power does
    not light.


    2. Main Application Field:
    ● Full color LED string light, LED full color module, LED super hard and soft lights, LED guardrail tube,
    LED appearance / scene lighting
    ● LED point light, LED pixel screen, LED shaped screen, a variety of electronic products, electrical
    equipment etc..


    3. Description:
    ● Top SMD internal integrated high quality external control line serial cascade constant current IC; 5V
    application; default on electric lights;
    ● Control circuit and the RGB chip in SMD 3535 components, to form a complete control of pixel,
    color mixing uniformity and consistency;
    ● The Two-wire synchronous control, built-in bi-directional transmission function.
    ●RGB three-color output control, 64Bit (65536 level) color settings; each set of data are 1bit start code +15
    Bit (32) brightness adjustment (red, green, blue three ports each 5bits, corresponding to S4 ~ S0) ; 48bits
    gray data (red, green, blue 16bits) composition.
    ● Three-way constant current drive, built-in high-precision and high stability of the oscillator, current error
    <± 5%.
    ● The maximum serial data input frequency 30MHZ, refresh rate of up to 4KHz, cascade up to 1024 points.
    ● REXT external resistance adjusting current (REXT floating, OUTR / G / B to about 18mA; REXT external
    resistor to adjust the maximum current of 60mA).


    4. Mechanical Dimensions:





    5. PIN configuration:




    6. Recommended dimensions for PCB products:





    SK9826MINI LED Datasheet:

    http://www.normandled.com/upload/201904/SK9826MINI%20LED%20Datasheet.pdf




Home | Products | Support | News | About Normand | Contact us
                       SHENZHEN NORMAND ELECTRONIC CO.,LTD
展开客服